A-96.250.491 / 190121
AMI Deltacon DG
Program List and Explanations
61
5.1.1.3
Monitoring of resin: Select “yes” if consumption of cation resin should
be calculated and displayed. Replacement of exhausted resin must
now be confirmed in menu <Maintenance>.
5.1.1.4
Resin Capacity:
Enter the resin capacity.
Range: 0.5–4.0 eq/l
5.1.1.5
Volume of resin:
Enter the volume of the resin bottle.
Range: 0.5–30.0 l
5.1.2
Sensor parameters
:
5.1.2.1
Sensor 1
5.1.2.1.1
Cell Constant
: Enter the cell constant printed on the sensor label.
5.1.2.1.2
Temp. Corr
: Enter the temperature correction printed on the sensor
label.
5.1.2.1.3
Cable length
: Enter the cable length. Set the cable length to 0.0 m if
the sensors are installed in the flow cell on the AMI monitor.
5.1.2.1.5
Temp. comp
:
5.1.2.1.5.1
Comp
.: Available compensation models:
Strong acids (Never select strong acids for sensor 1!)
Strong bases
Ammonia
Morpholine
Ethanolamines
5.1.2.2
Sensor 2
5.1.2.2.1
Cell Constant
: Enter the cell constant printed on the sensor label.
5.1.2.2.2
Temp. Corr
: Enter the temperature correction printed on the sensor
label.
5.1.2.2.3
Cable length
: Enter the cable length. Set the cable length to 0.0 m if
the sensors are installed in the flow cell on the AMI monitor.
5.1.2.2.5
Temp. comp
:
5.1.2.2.5.1
Comp
.: Available compensation models:
Strong acids
5.1.2.3
Sensor 3
5.1.2.3.1
Cell Constant
: Enter the cell constant printed on the sensor label.
5.1.2.3.2
Temp. Corr
: Enter the temperature correction printed on the sensor
label.
5.1.2.3.3
Cable length
: Enter the cable length. Set the cable length to 0.0 m if
the sensors are installed in the flow cell of the AMI monitor.
