Swann 960H H.264 User Manual Download Page 47

Page: 47 / 60

English

anc
ed C

onfigur

ation

Here you’ll find a comprehensive list of

hard drives connected to the DVR.
Typically, there will be one entry here,

and it will be the hard drive that came

with the DVR

(if one was included)

- you’ll

get many years of usage out of the

included hard drive.
The drive connected to the internal

SATA port will be listed here. A drive

connected via eSATA will appear on this

list, and be useable in the same manner

as an internal HDD.
External drives connected via USB

will

not

appear on this list, and can’t be

used to record footage - USB lacks the

bandwidth to write multiple streams

simultaneously. External USB drives can

only be used for backing up footage.

S.M.A.R.T.

(Self-Monitoring, Analysis

and Reporting Technology - gotta love

a good acronym) is your hard drive’s

way of telling the DVR how it’s going.

Status:

The current condition of the

hard drive. It should say “Good”. If it

says anything else, this indicates there’s

a problem with your hard drive.
If there’s no problem, there’s little else

to do here, unless reading the output

of the dozens of self-tests the hard

drive performs on itself is of interest to

you.
If you have been confronted with a HDD

Error, or the Status entry doesn’t read

“Good” then you can use the S.M.A.R.T.

information to attempt to diagnose the

problem. The information presented

in the S.M.A.R.T. report is practically

identical to what you’d see on a

desktop PC while using

Administrator

Tools

, or a similar service.

Device: HDD

Device: S.M.A.R.T.

Summary of Contents for 960H H.264





























































Search results

Summary of Contents for 960H H.264

Reviews:

Related manuals for 960H H.264

Brands by name

Popular brands

Swann 960H H.264, User Manual

Search results

Summary of Contents for 960H H.264

Reviews:

Related manuals for 960H H.264

Brands by name

Popular brands