Swagelok 8HPH Series, User Manual, Page: 34 / 96

32 Series 8HPH Weld Head User’s Manual
6. Reinstall the brush side cover.
7. Insert the four plastic flathead screws to secure the brush side
cover. See Figure 54.
8. Position the hooked end of the side shield into the recess at the
top of the insert and clamp the side shield down. See Figure 55.
9. Reinstall the plastic flathead screws and metal flathead screws to
secure the side shields.
Figure 54 Installing the Brush Side Cover
WARNING!
DO NOT REPLACE PLASTIC
FLATHEAD SCREWS WITH
METAL FLATHEAD SCREWS .
THIS COULD EXPOSE THE
WELDING OPERATOR TO
WELDING ARC START
VOLTAGES .
Figure 55 Installing Side Shields
WARNING!
DO NOT REPLACE PLASTIC
FLATHEAD SCREWS WITH
METAL FLATHEAD SCREWS .
THIS COULD EXPOSE THE
WELDING OPERATOR TO
WELDING ARC START
VOLTAGES .
Plastic Screws
Metal Screws
13-170.indb 32 2/1/13 1:46 PM