SVS-Vistek 926.15hr387*XGE Series User Manual Download Page 6 | Manualshive

Page: 6 / 122

background image

SVS-VISTEK–Legal Information Contents of Camera Set

6

1

Legal Information

Information given within the manual accurate as to: February 12, 2019,
errors and omissions excepted.

These products are designed for industrial applications only. Cameras
from SVS-Vistek are not designed for life support systems where
malfunction of the products might result in any risk of personal harm or
injury. Customers, integrators and end users of SVS-Vistek products might
sell these products and agree to do so at their own risk, as SVS-Vistek will
not take any liability for any damage from improper use or sale.

Europe

This camera is CE tested, rules of EN 55022:2010+AC2011 and
EN61000-6-2:2005 apply.

The product is in compliance with the requirements of the following
European directives:

2014/30/EU

Electromagnetic compatibility (EMC)

2011/65/EU

Restriction of the use of certain hazardous substances

in electrical and electronic equipment (RoHS)

All SVS-VISTEK cameras comply with the recommendation of the
European Union concerning RoHS Rules

USA and Canada

This device complies with part 15 of the FCC Rules. Operation is subject
to the following conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment is compliant with Class A of CISPR 32. Warning: In a
residential environment this equipment may cause radio interference. This
equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules.

It is necessary to use a shielded power supply cable. You can then use the
“shield contact” on the connector which has GND contact to the camera
housing. This is essential for any use. If not done and camera is destroyed
due to Radio Magnetic Interference (RMI) WARRANTY is void.

>

US/UK and European power line adapter can be delivered.
Otherwise use filtered and stabilized DC power supply

>

Shock & Vibration Resistance is tested: For detailed Specifications
refer to Specification

«
...
4
5
6
7
8
...
»

Summary of Contents for 926.15hr387*XGE Series



























































































































Reviews:

No comments

Related manuals for 926.15hr387*XGE Series

Brand: Tamron Pages: 9

Brand: Abus Pages: 20

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 189

Brand: Panasonic Pages: 195

Brand: Panasonic Pages: 56

Brand: JAI Pages: 38

Brand: Velleman Pages: 19

Brand: Odys Pages: 21

M. Zuiko Digital

Brand: Olympus Pages: 58

Brand: Aluratek Pages: 24

CAMEDIA C-3030ZOOM

Brand: Olympus Pages: 229

Brand: Mercury Pages: 35

Brand: Konica Minolta Pages: 19

Brand: Wizard-tk Pages: 5

Brand: Genie Pages: 10

CAMEDIA C-5060 Wide Zoom

Brand: Olympus Pages: 289

Brand: Admiral Video Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands