SVS-Vistek 926.15hr387*XGE Series, User Manual

Page: 12 / 122

SVS-VISTEK
Connectors 12
3 Connectors
3.1 Dual GigE Vision
Any dual GigE camera can be run as well with a single network
connection. Dual GigE connection is required only if single network
connection does not provide sufficient bandwidth. For dual GigE
operation, 2 NICs need to be teamed. NIC teaming is a feature of the
operating system.
For single line operation of dual GigE cameras use the upper right
network port for single line operation.
By default, the camera does not have a persistent IP address.
For Dual GigE Vision a “Static Link Aggregation” (SLA) is
recommended. Refer to Teaming.
When forcing an IP address by using the PC internal network dialog,
changes are only valid until the next restart of the Camera.
For a peer-to-peer connection of a GigE camera to a PC a network
address assignment based on LLA (Local Link Address) is
recommended. This involves a network mask “255.255.0.0” as well as
a fixed preamble “169.254.xxx.xxx” of the network address range. A
GigE camera will fall back to LLA when no DHCP server is available
and no fixed network address was assigned to the camera.
physical layout of RJ45
female connector