SVS-Vistek 926.15hr387*XGE Series, User Manual

Page: 16 / 122

SVS-VISTEK
The HR Camera Series 16
4 The HR Camera Series
Focusing on details
The SVCam HR series is a series of industrial machine vision cameras
featuring especially on very high image resolutions and interface high
speed without compromising on image quality. Camera sensors and
interfaces are built to deliver maximum sensor and interface bandwidth.
With this kind of high resolution sensors being already very large, the HR
series comes with an M58 mount with the possibility to adapt for any kind
of lens.
High end CCD and CMOS image sensors with high resolutions permit
swift and effortless capture of a wide field of view, making this camera
series your prime choice for demanding applications such as optical
metrology, quality monitoring, wide field surveillance or traffic monitoring.
GigE-Vision features
GigE Vision is an industrial interface standard for video transmission and
device control over Ethernet networks. Being an industry standard, it
facilitates easy and quick interchangeability between units, shortening
design cycles and reducing development costs. It provides numerous
software and hardware advantages for machine vision.
>
Cost effective
>
Wide range of „off the shelf“ industrial-standard plugs and cables
>
High bandwidth data transfer rate (120 MB/sec per output)
>
Up to 100 m range without additional switch
>
Wide range of applications in image processing
>
Remote service capability
>
GenICam compliant
>
SDK for Windows XP/10 (32/64 bit), and Linux
>
ARM support (ARM/Jetson)
>
SDK with GenTL support
In case your camera features a Dual GigE connector, the bandwidth and
data transfer rate are close to double this value. Most operating systems
do support link aggregation.
10 GigE Vision
10 GigE on copper lines is a standard existing for years already in
professional internet technology. Basically, it keeps the benefits and
fundamental ideas of GigE and adds the ten times higher speed. There
are 2 main disadvantages compared to GigE:
>
Higher power dissipation in 10 GigE devices
>
Reduced cable lengths
By using high-quality CAT 6 cables, cable lengths of up to 100m are
possible and compensating the first disadvantage somewhat. Despite
using the latest 10 GigE transceivers in the devices, the increased power
dissipation still will result in slightly larger camera housings.
The benefit of 10 GigE is the higher speed: Up to 1.1 GB/s of data are
possible, what is in the range of high-performance image sensors.