SVS-Vistek 926.15hr387*XGE Series, User Manual

Page: 46 / 122

SVS-VISTEK
Feature description 46
L E D s in F l as h M o de
Most LED lights can cope with currents higher than specs. This gives you
higher light output when light is ON. Please refer to your LED specs if LED
overdrive is permitted.
By controlling the duty cycle the intensity of light and current can be
controlled. See sequencer example how to adjust the values in the
GenICam tree for strobe control.
NOTICE
The shorter the „time on“ – the higher current can be
used when driving LEDs with current higher than spec
Strobe vocabulary
For an example how to enable and adjust the integrated strobe controller
refer to
sequencer . Times and frequencies are set in tics. 1 tic = 15ns.
E x p os u r e D e la y
A tic value, representing the time between the (logical) positive edge of
trigger pulse and start of integration time.
S t ro b e P o la rit y
Positive or negative polarity of the hardware strobe output can be
selected.
S t ro b e Dur at i o n
The exposure time of LED lights can be set in tics . The min duration is 1
µ sec. The longest time is 1 second.
S t ro b e De la y
The delay between the (logical) positive edge of trigger pulse and strobe
pulse output.