SVP UDR-70, User Manual

Page: 54 / 182

45
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
2
Dest IP & Port:
In this option, the IP address and the number of the port of the
device to which data is sent must be configured. In case you
want to send data to a multicast address just enter the desired
multicast address. To change the IP address and the number of
the port, first press the OK button and then, with the Up, Down
keys select the desired number. To change from one character
to another, press Right, Left keys. To save the value, press the
OK button. (editable parameter)
3
TP per IP:
In this field the number of Transport Stream packets per IP
(from 1 to 7) can be configured. To select the desired value,
press the Right and Left buttons. (eligible parameter)
4
Protocol:
The type of protocol used for the communication can be RTP,
UDP or SRT. To select the desired protocol for the
communication, use Right and Left buttons. (eligible parameter)
5
Time To Live (TTL):
This field limits the lifetime of the data. The Time To Live value
(from 1 to 255) means the number of routers that a packet can
reach until it is discarded. To configure this value, first press the
OK button and then, with the Up, Down, Right and Left buttons
select the desired value. To save the value, press OK button.
(editable parameter)
6
Stream Diagnostics:
In this field the estimated bitrate and IP packet size is shown.
Table 14: IP Output menu options
The Local IP address and the destination IP address MUST be different.
When a parameter of the TS over IP menu options is changed, it takes 30
seconds for the device to be configured and work again.