SVP UDR-70, User Manual

Page: 154 / 182

145
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
A.2 Technical Specifications
A.2.2 QPT-90
The QPT-90 positioner, if the temperature drops below -15ºC, the
inner heater is activated. Note that if it is intended to use the
positioner in an environment in which the temperature can drop below
that temperature, the current can rise up to 4.5 Amp, so use a power
supply and an appropriate cable which can handle this current.
It is recommended to use AWG28 for the wires of the data cable, and
twisted pair for both TX and RX signals.
To attach the antenna to the positioner, it is necessary a CLAM-1
bracket (Not included with the positioner).
Performance
Item Specifications
Load Capacity 90 Ib-ft (10.8 Nm) maximum
Operating Voltage Range 24 VDC (±4 VDC)
Pan-Axis Range 435º (±217.5º) (non-slip ring)
Pan-Axis Speed Max. 25º/sec
Tilt-Axis Range 180º (±90º)
Tilt-Axis Speed Max.-8º/sec
Internal Heater Included standard,
thermostatically controlled
Consumption 4.4A at 24 VDC
Operating Temperature Without Heater: -15ºC to 55ºC
With Heater: -30ºC to 55ºC
Motor Type / Drive Stepper and DC Brush
Connector Specifications Mil-Spec grade
Materials Housing 6061-T6 Aluminium,
stainless steel hardware,
permanently sealed radial ball
bearings
Finish/Colour White powder coat paint over
alodined chromate for corrosion
resistance standard
Weight 16.8 kg
Table 42: QPT-90 Standard Performance