SVP UDR-70, User Manual

Page: 43 / 182

34
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
Line
nº
Function
1
DVB-S/S2 Frequency:
In this field, the frequency of the received signal must
be set. To establish the frequency value first, press
the OK button and then, with the Up, Down arrows
buttons select the desired value. To save the
introduced value, press the OK button. (editable
parameter). The frequency value can be edited if the
ODU is set in Slave channel.
If in the corresponding ODU a channel is selected, the
number of the selected channel will appear next to
the frequency value. If the ODU is not connected,
some dashes will appear.
3
DVB-S/S2 Demod Monitor:
In this field, the number of the IF input which is wanted
to be monitored must be selected. Once it has been
selected, OK button must be pressed to access to the
monitor screen where the parameters of the received
signal shown below are displayed. (reading parameters)
The available options are:

Const (QPSK, 8PSK, 16APSK, 32APSK)

LDPC FEC (1/4, 1/3, 2/5, 1/2, 3/5, 2/3, ¾, 4/5, 5/6,
8/9, 9/10) (DVB-S2) or FEC (1/2, 2/3, ¾, 4/5, 8/9,
9/10) (DVB-S)

Level (dBm)

MER (dB)

C/N (dB)

ODU Temp (ºC)

ODU Volt (V)
4
DVB-S/S2 Edit List of ODU Frequency Channels:
In this field, pressing the OK button, the user can edit
the frequency of the channel presets.
5
DVB-S/S2 IF Input:
In this option, the IF input connector must be specified.
To select the desired, Right, Left buttons must be
pressed. (eligible parameter)
Table 10: DVB-S/S2 Input Select menu options