SVP UDR-70, User Manual

Page: 125 / 182

116
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
8.2.1 Power supply
In this section, technical features about the power supply connections
available and the connectors needed are described.
AC Power supply
The receiver equipment can be powered by an AC source between 90
and 240 V.
The frequency should be between 50 and 60 Hz.
The AC mains input uses a Neutrik MLC connector. A cable with the
required connectors is supplied with the receiver. The AC power
connector used in this equipment is designed to prevent accidental
disconnection. To extract the connector, pull back the locking clip and
rotate the connector, as indicated on the connector itself.
Power supply AC connection technical features
Item Features
Connector label POWER A.C.
Connector type MLC Neutrik
Supply voltage 90-240 V. (50/60Hz)
Table 23: AC Power supply features
Pinout
Pin Description
1 L
2 GND
3 N
Table 24: Power supply connector pinout