SVP UDR-70, User Manual

Page: 19 / 182

10
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
Chapter 4: Receiver Operation and Menus
This section contains all the necessary information to operate, control and
configure the UDR-70 receiver.
4.1 Display
To switch the equipment on and off, press ON/OFF button. When the equipment
is turned on, the display will show a start-up, and then it will display the first
main screen. To change from one main screen to another, the OK button must
be pressed.

1 st main screen: displays the most important parameters of the received
signal.

2 nd main screen: shows signal reception conditions, level and quality of the
received signal (for DVB-T2 and DVB-T).
It is important to consider that the 1
st
main screen is different depending on the
standard of the received signal and on the selected input.
Next there are shown the linkages between the input and the character displayed
in the principal screen:
Audio A
Data
DATA D
GPS G
Table 1: Linkages between the input and the character displayed