Sven ROYAL 1R, Operation Manual

Page: 22 / 24

–
+
Player
DVD
PC
Audio cable
Active speaker Passive speaker
2RCA to mini-jack
signal cable
2RCA to 2RCA
signal cable
• Adjust the volume level with buttons VOL+/–
g
on the remote control. It is also possible to set the
desired sound level with buttons VOL- (level decrease)
d
and VOL + (level increase)
e
after
pressing the function button
c
once, the power LED
a
on the front panel will illuminate green.
• Adjust the bass level with buttons BASS+/–
c
on the remote control. It is also possible to set the
desired bass level with buttons VOL- (level decrease)
d
and VOL + (level increase)
e
after
pressing the function button
c
twice, the power LED
a
on the front panel will illuminate orange.
• Adjust the treble level with buttons TRE+/
e
on the remote control. It is also possible to set the
desired treble level with buttons VOL- (level decrease)
d
and VOL + (level increase)
e
after
pressing the function button
c
three times, the power LED
a
on the front panel will illuminate red.
•
Press ST-BY (
a
, Fig. 3) on the remote control to temporarily turn o Ԛ the system. Press this
button again to turn on the system.
• Press the MUTE button
b
on the remote control to temporarily turn o Ԛ the sound. Press this
button again to turn on the sound.
• After using the MSS, mind to switch it o Ԛ with the POWER ON/OFF switch (
c
, OFF position), and
unplug the power cable
j
from the mains socket.
Notes:
• If you press the FUNCTION button
c
and hold it down for more than 3 seconds, the
system will return to the default volume and timbre settings and the sound will be
determined by the input signal only.
• Though the MSS has two audio inputs, you can turn on only one audio source at a time:
PC or AUX.
Fig. 4. Connection diagram
ENG
21
Operation Manual
ROYAL 1R