SV 104IS USER’S MANUAL______________________________________________________
57
Setting hour and day of the measurement’s start
The “
Start
Time”
determines the time for the measurement to start. The required hour and minute can be
selected.
The
“Start Day”
determines the date of the measurement start. The timer can be programmed up to one
month ahead and during the date setting the current state of the
R
eal
T
ime
C
lock is taken into account. The
required date can be selected. Make sure to check that the real time clock settings for the measurement
location are correct before beginning a delayed timer measurement.
Selecting the period between two consecutive measurements
The
“Repeat”
and
“Repetitions Number”
positions are disp
layed when “
Regular”
mode is selected.
The period between two consecutive measurements is set in the “
Repeat”
line.
“Repetitions Number”
parameter can be programmed from
1
up to
100
.
There is also possibility to program two independent
PAUSES
in the form of
Relative
, or
Absolute
time
programming. See Figure 5-18 for detailed settings in magnified area.
