Suzuki TU250X, Service Manual

Page: 29 / 370

PERIODIC MAINTENANCE 2-11
• Apply engine oil to new O-rings (
4
,
5
).
• Install a new oil filter.
• Install the spring
2
correctly.
• Install the oil filter cap and tighten the nuts securely.
• Add new engine oil and check the oil level as described in the
engine oil replacement procedure.

Engine oil capacity
Oil change: 1 400 ml (1.5 US qt)
Oil and filter change: 1 500 ml L (1.6 US qt)
Engine overhaul: 1 900 ml (2.0 US qt)

OIL STRAINER CLEANING
(

3-43)
DRIVE CHAIN
Visually inspect the drive chain for the possible defects listed
below.
* Loose pins
* Improper chain adjustment
* Damaged rollers * Excessive wear
* Dry or rusted links * Kinked or binding links
* Missing O-ring seals
If any defects are found, the drive chain must be replaced.
(

8-54)
NOTE:
When replacing the drive chain, replace the drive chain and
sprockets as a set.
Make sure that the oil filter is installed properly. If the
filter is installed improperly, serious engine damage
may result.
Inspect initially at 1 000 km (600 miles, 3 months) and
every 5 000 km (3 000 miles, 15 months) thereafter.
Clean and lubricate every 1 000 km (600 miles).
O-ring seal
Pin
Roller