Suzuki S-1800H80/180, Technical Manual

Page: 8 / 123

* By selecting the mode selection dial to MENU 2,
“
SELF CHECK
”
appears on the screen.
SELF CHECK
SELF CHECK
DATA-TX OK… Receiving the data between the Monitor unit and the Hull Unit.
DATA-RX OK… Transmitting the data between the Monitor and the Hull Unit.
DATA OK… Data transferred between the Monitor Unit and the Hull Unit.
HOIST OK… Hoist up and down
TILT OK… （Not available in this model）
TRAIN OK… Bearing direction control on the soundome
ROM-VER OK… P-Rom version of Monitor or Hull unit
OTHERS OK… （Not available in this model）
DATA-TX NG
Power Supply PCB for Monitor or for Hull unit (5V-2) is faulty.
Main PCB for Monitor or for Hull Unit is faulty. (C. Circuit: BUSY, ACK, REQ)
Signal cable is faulty
DATA-RX NG
Main PCB for Monitor or for Hull Unit is faulty. (C. Circuit: BUSY, ACK, REQ)
DATA NG
Main PCB for Monitor or for Hull unit is faulty. (C. Circuit: DIO 0〜DIO 3)
Signal cable is faulty
HOIST NG
Fusing at FUSE 2 for hoist motor
Hoist control circuit in Main PCB for Hull unit is faulty.
Hoist motor cable is faulty.
Limit Switch is faulty.
Hoist Motor is faulty.
TRAIN NG
Motor Control PCB for Hull Unit is faulty. (Train Control section)
Soundome is faulty.
Soundome cable is faulty.
ROM-VER NG
P-ROM version for Monitor or for Hull Unit is not correct.
-7-
SELF CHECK SCREEN