Suzuki S-1800H80/180, Technical Manual

Page: 20 / 123

NO
YES
NO
YES
NO
YES
NO
YES
[BACKLIGHT FOR LCD UNIT]
When one side does not light, either the upper part or the lower part gets dark.
When both sides do not light, no picture is seen.
Contact your authorized dealers when replacing the backlights.
-19-
S-1800M10
Screen gets bright, but nothing appears
POWER SUPPLY PCB
Verify that 5 volt is present in Main
PCB for Monitor portion.
Verify there is RGB OUTPUT
at J15 in Main PCB normal.
RGB：
R2〜R5
G2〜G5
B2〜B5
LCD UNIT
MAIN PCB
S-1800M10
Screen doesn't change into bright, even if the brightness dial is turned.
Verify if the voltage changes at
J2-No.2 in Control PCB when
the brightness dial is turned.
Change brightness volume.
Verify if the voltage changes at
J5-No.3 in Main PCB when the
brightness dial is turned.
Disconnection in Main PCB
LCD UNIT
(INVERTER)
(BACKLIGHT)