Suzuki RV50, Service Manual

Page: 29 / 59

24. Disconnecting engine oil pipe
Required tool:
8mm
Tightening torque:
'' 20 "' 30 kg-cm (1.4 - 2.2 ft-lb)
Disconnect the engine oil pipes by loosening each
union bolt on both sides of the crankcase respec­
tively.
Engine oil pipe
25. Loosening crankcase and oil pump screws
Required tool:
Special tool
#-09 900-0 9002
Impact screw driver
28
and ====::o:c:J big size
26. Separating crankcase
Required tool:
Set the crankcase separating tool on the left crank­
case as shown in the fi
gu
re. Separate the crank­
case into right and left halves by screwing the
handle of the special tool in. At the same time,
push in the engine oil pipe at the right side of the
case so as not to damage it.
27. Removing oil pump
Required tool:
� small size
Push out the engine oil pipe guide on the left
crankcase paying attention not to damage the pipe
and then remove the oil pump.
CD Engine oil pipe guide