Suzuki NEXA BALENO, Owner'S Manual & Service Booklet

Page: 393 / 422

10-10
EMERGENCY SERVICE
55TH0-74E
55T100180
(a) Specified position of jack stand for the
front side
(b) Specified position of jack stand for the
rear side
NOTE:
For more details, consult a Maruti Suzuki
authorised workshop.
Changing Wheels
To change a wheel, use the following pro-
cedure:
1) Prepare the jack and tools.
2) Loosen, but do not remove the wheel
nuts.
3) Jack up the vehicle (follow the jacking
instructions in this section).
4) Remove the wheel nuts and wheel.
NOTICE
If you use the jack stand (2) in the
condition that it touches the side
skirt (6), the side skirt may be broken
or damaged.
When using the jack stand, make
sure that it does not touch the side
skirt.
(6)
(2)
(6)
(2)
(a) (b)
WARNING
Never change a wheel in traffic lane.
Always move the vehicle off the road
on level, hard ground away from traf-
fic for changing a wheel. For any fur-
ther assistance contact your nearest
Maruti Suzuki authorised workshop.
WARNING
• Shift into “R” (Reverse) for a manual
transmission or Auto Gear Shift
vehicle when you jack up the vehi-
cle.
• Never jack up the vehicle with the
transmission in “N” (Neutral). Oth-
erwise, unstable jack may cause an
accident.
CAUTION
Immediately after the vehicle has
been driven, the wheels, the wheel
nuts and the area around the brakes
might be extremely hot. Touching
these areas may cause burn injury
Do not touch these areas, immedi-
ately after the vehicle has been
driven.