Suzuki NEXA BALENO, Owner'S Manual & Service Booklet

Page: 391 / 422

10-8
EMERGENCY SERVICE
55TH0-74E
59RN10120
59R80200
5) Position the jack at an angle as shown
in the illustration and raise the jack by
turning the jack handle clockwise until
the jack-head groove fits around the
jacking bar boss (1)beneath the vehicle
body.
81PN117
6) Continue to raise the jack slowly and
smoothly until the tyre clears the
ground. Do not raise the vehicle more
than necessary.
(1)
(1)
WARNING
• Use the jack only to change wheels
on level, hard ground.
• Never jack up the vehicle on an
inclined surface.
• Never raise the vehicle with the
jack in a location other than
between the frame bosses near the
wheel to be changed.
• Make sure that the jack is raised at
least 25 mm (1 inches) before it
contacts the boss. Use of the jack
when it is within 25 mm (1 inches)
of being fully collapsed may result
in failure of the jack.
• Do not use wooden blocks or simi-
lar objects as a jack underlay.
• No person should place any por-
tion of their body under a vehicle
that is supported by a jack. Never
place your hands or feet under the
raised vehicle when it is supported
by a jack.
• Never run the engine when the
vehicle is supported by the jack
and never allow passengers to
remain in the vehicle.