5-13
55TH0-74E
55T050200
(1) Immobilizer/keyless push start sys-
tem warning light (blinks)
(2) Master warning indicator light (blinks)
If the warning is given, place the remote
controller inside the vehicle as soon as
possible.
• Any attempt to start the engine will fail
while the warning is active. The mes-
sage appearing in the information dis-
play in the instrument cluster will also
indicate this condition. Refer to “Informa-
tion Display” in the “INSTRUMENT
CLUSTER” section for details.
• Normally, the immobilizer/keyless push
start system warning light should go out
and the master warning indicator light
should stop blinking shortly after the
remote controller is brought back inside
the vehicle. If they remain lit and blink-
ing, change the ignition mode to LOCK
(OFF) by pressing the engine switch and
then perform the engine starting opera-
tion. Refer to “Starting / Stopping Engine
(Vehicle with Keyless Push Start Sys-
tem) (if equipped)” in this section.
NOTE:
Always keep the remote controller with you
as the driver.
Starting / Stopping Engine
(Vehicle without Keyless
Push Start System)
(if equipped)
Starting Engine
56RH00305
1) Check that the parking brake is set fully.
2) Turn off such loads as the headlights
and air conditioning system to facilitate
starting of the engine.
(1)
(2)
MT
Auto Gear Shift
Summary of Contents for NEXA BALENO
