Suzuki NEXA BALENO, Owner'S Manual & Service Booklet

Page: 74 / 422

2-33
FOR SAFE DRIVING
55TH0-74E
Securing Child Restraint System by
Seat Belt
Choose the appropriate seat for the child’s
age and physical size.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not cause
inconvenience to the occupants.
Securing
This section explains securing the child
restraint system in the rear seat.
55T020080
1) When the child restraint system con-
tacts the head restraint, adjust the
height of the head restraint or remove it
for fitting the child restraint system.
WARNING
61M0241
• Do not install a child restraint sys-
tem on the front passenger's seat.
• If you install a child restraint sys-
tem in the rear seat, slide the front
seat far enough forward so that the
child’s feet do not contact the front
seatback. This will help avoid
injury to the child in the event of an
accident.
• Do not hold a child on passenger’s
lap when the vehicle is in motion.
(Continued)
WARNING
(Continued)
• Even if the passenger holds the
child tightly, he/she would not be
supported enough in the event of
an accident and it could result in a
serious injury of the child
CAUTION
If your vehicle is equipped with the
head restraint, adjust the height of
the head restraint or remove it for fit-
ting the child restraint, as necessary.
However, if a booster cushion not
equipped with the head restraint is
fitted, the head restraint should not
be removed. If the head restraint is
removed for fitting the child restraint,
you need to install it again after
removing the child restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision.
WARNING
If the child restraint system contacts
the head restraint, the child restraint
system cannot be secured firmly.
This may cause severe injury to a
child in a collision.
When installing the child restraint
system, adjust the head restraint
height to the highest position as
much as possible or remove the head
restraint so that the child restraint
system would not contact the head
restraint.