29
REAR SUSPENSION
Compression Damping Force Setting
Adjust the setting of the compression damping force
to the standard position. To adjust, turn the adjuster
A
clockwise until it stops then turn it counterclock-
wise 2 turns are felt and the two punch marks align.
Standard setting position: 2 turns out
#
Rebound Damping Force Setting
Adjust the setting of the rebound damping force to the
standard position. To adjust, turn the adjuster
B
clockwise until it stops then turn it counterclockwise
16 clicks are felt and the two punch marks align.
Standard setting position: 16 clicks out
#
TIRE PRESSURE
Using an accurate air gauge, check the air pressure
of the front and rear tires. The pressure should be as
shown.
COLD INFLATION TIRE PRESSURE
ENGINE COOLANT
The engine coolant level should be kept between the
“FULL” and “LOW” level lines as shown in the photo-
graph. Inspect the level with the vehicle held upright
on level ground.
Please refer to the owner’s manual for correct adjust-
ment.
A: Engine coolant reservoir
B: “FULL” level line
C: “LOW” level line
Do not force the adjuster screw
A
A
A
A
past the
stopped position or you may damage the
adjuster.
Do not force the adjuster screw
B
B
B
B
past the
stopped position or you may damage the
adjuster.
LOAD
TIRE PRESSURE
FRONT
REAR
Up to 110 kg
243 lbs
30 kPa
0.30 kg/cm
2
4.4 psi
27.5 kPa
0.275 kg/cm
2
4.0 psi
