ENGINE
3-23
• Install the clutch drum
1
, washer
2
and key
3
.
• Install the key into the key groove and mount the clutch shoe
on the key.
• Install the wave washer.
• Install the guide plate, wave washer and thrust washer.
• Hold the generator rotor using special tool.
• Tighten the clutch shoe nut to the specified torque.
#
Clutch shoe nut: 85 N.m (8.5 kgf.m, 61.5 lb-ft)
'
09930-40113: Rotor holder
• Install the crankcase oil separator
4
.
• Before installing the clutch cover, check the oil passage and
check valve
6
for clogging and oil seal
5
for damage.
