Suzuki GZ250 Marauder Page 170 Service Manual Download

Page: 170 / 230

6-9 ELECTRICAL SYSTEM

REGULATOR/RECTIFIER

•  Remove the front seat. (See p. 5-1.)
•  Remove the fuel tank. (See p. 4-1.)
•  Disconnect the regulator/rectifier couplers.

Measure the voltage between the lead wires in the follow-
ing table.

09900-25008: Multi circuit tester set

Tester knob indication: Diode test

Unit: V

Probe of tester to:

B/W

0.5-1.0

0.3-0. 7

0.3-0.7

0.3-0. 7

B/W

1.2-1.5

0.3-0. 7

1.2-1.5

1.2-1. 5

1.2-1.5

0.3-0. 7

1.2-1.5

0.3-0. 7

1.2-1.5

WIRE COLOR

R: Red

Y: Yellow

B/W: Black with White tracer

NOTE:

If the tester lead under 1.4V, replace the battery of multi

circuit tester when do not connecting the tester probes.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for GZ250 Marauder







































































































































































































































Search results

Summary of Contents for GZ250 Marauder

Reviews:

Related manuals for GZ250 Marauder

Brands by name

Popular brands

Suzuki GZ250 Marauder, Service Manual

Search results

Summary of Contents for GZ250 Marauder

Reviews:

Related manuals for GZ250 Marauder

Brands by name

Popular brands