PERIODIC MAINTENANCE 2-7
EXHAUST PIPE BOLTS AND MUFFLER
BOLTS
Tighten initially at 1 000 km (600 miles, 1 month) and ev-
ery 12 000 km (7 500 miles, 12 months) thereafter.
• Tighten the exhaust pipe bolts and muffler mounting bolts to
the specified torque.
)
Exhaust pipe bolt: 23 N.m (2.3 kgf.m, 16.5 lb-ft)
Muffler mounting bolt: 29 N.m (2.9 kgf.m, 21.0 lb-ft)
AIR CLEANER
Inspect every 6 000 km (4 000 miles, 6 months) and re-
place every 18 000 km (11 000 miles, 18 months).
• Remove the seat and fuel tank. (
$
4-3)
• Remove the fuel tank mounting bracket
1
.
• Remove the air cleaner element cover
2
.
• Remove the air cleaner element
3
.
• Carefully use compressed air to clean the air cleaner element.
'
Always apply compressed air to the inside of the air
cleaner element. If compressed air is applied to the out-
side, dirt will be forced into the pores of the air cleaner
element, restricting air flow through the air cleaner ele-
ment.
Summary of Contents for GSF1200 2001
