manualshive.com logo in svg

Suzuki DF115B, Owner'S Manual

Share
Download
Suzuki DF115B Owner'S Manual Download Page 34

34

OPERATION OF TILTING 
SYSTEMS

POWER TRIM AND TILT

The “Power Trim and Tilt” is operated by press-
ing the switch. To tilt the motor up, press the
upper part of the switch. To tilt the motor down,
press the lower part of the switch.

If equipped with Keyless Start System:

V

 WARNING

The power trim and tilt (PTT) switch on the
side cover can be accidentally activated when
the Keyless Start System is in OFF state,
resulting in injury. 

Keep all persons away from the outboard
motor to help prevent accidental activation of
the PTT system. 

UP

DOWN

UP
DOWN

If not equipped with Keyless Start System:

NOTE:
Repeated operation of the power trim and tilt
(PTT) causes the overheating of the PTT motor
and the protection circuit may stop the opera-
tion of the motor. While the protection circuit
activated, the PTT switch is inoperative. This
inoperative condition of the system is cancelled
once the overheating is resolved.

MANUAL TILTING

If you are unable to tilt the motor using the
“Power Trim and Tilt” because of an electrical
problem or some other problem, you can move
the motor manually. To tilt the motor up or
down, turn the manual release valve 

A

 two

turns counterclockwise, move the motor to the
desired position, then retighten the release
screw.

V

 WARNING

The power trim and tilt (PTT) switch can be
accidentally activated when the ignition key is
off, resulting in injury.

Keep all persons away from the outboard
motor to help prevent accidental activation of
the PTT system. 

V

 CAUTION

The motor is very heavy. When you tilt it man-
ually, you could injure your back or slip and
fall causing injury. 

When you tilt the motor manually, ensure that
your grip and footing are secure and that you
are able to support the weight of the engine.

OPEN

CLOSE

Summary of Contents for DF115B












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands