19
NOTE:
If the operation in Step (2) is not performed
within 60 seconds after performing Step (1), the
passcode input operation will be cancelled and
the buzzer will sound three (3) times.
After the buzzer emits 10 sounds, it emits one
long sound before to returning to stand-by
mode for the second passcode digit.
(3) Repeat Step 2 to enter the second, third and
fourth passcode digits.
(4) After entering the fourth pass code digit, the
buzzer emits one continuous sound – within
60 seconds, turn the switch ON and hold it
for five (5) seconds until the buzzer stops,
then release it.
NOTE:
The buzzer emits one (1) short sound for the
1st digit, two (2) short sounds for the 2nd digit,
three (3) short sounds for the 3rd digit, and four
(4) short sounds for the 4th digit.
1
2
3
4
5
6
7
8
9
10
11
Example: When entering 7
ON & OFF
ON & OFF
PUSH
START
STOP
PUSH
START
STOP
Buzzer sound
When entering
the 1st digit
When entering
the 2nd digit
When entering
the 3rd digit
When entering
the 4th digit
NOTE:
• If a passcode is not entered during the 10
sounds, the process will start over again after
briefly turning the switch.
• If the main switch is not turned to select a
passcode number after repeating the pass-
code input operation three (3) times, the input
operation is cancelled.
In this case, the buzzer emits short beeps for
five (5) seconds to notify that the input opera-
tion has been cancelled.
• If the passcode input operation has been per-
formed multiple times, the last passcode
entered will become effective.
• To interrupt passcode input, install the lock
plate on the emergency stop switch.
NOTE:
When performing the passcode input operation
again after the operation has been cancelled
due to passcode input failure or after having
interrupted the operation;
1) Install the emergency switch lock plate.
2) Turn the main switch to the “ON & OFF”
position and then release it to the “PUSH
START/STOP” position.
3) Perform the procedure described above
from Step 5.
(5) After the buzzer has sounded once, the key-
fob LED will blink the entered passcode.
ON & OFF
ON & OFF
Hold it for five (5) seconds.
PUSH
START
STOP
PUSH
START
STOP
Example: In the case of passcode 1234
Number of keyless fob blinks
LED
