Suzuki CELERIO Series, Owner'S Manual

Page: 45 / 386

2-27
BEFORE DRIVING
84MM6-01E
Lap belt (if equipped)
To fasten the belt, pull the latch plate
attached to the seat belt across your hips
and press it straight into the buckle until
you hear a “click”. To reduce the risk of
sliding under the belt during a collision,
position the belt across your lap as low on
your hips as possible and adjust it to a
snug fit.
80JS028
To tighten the belt, pull the free end of the
belt across alongside the lap strap.
80JS029
To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow, at right angles to
the belt. The latch plate should then be
refitted into the buckle and the belt tight-
ened as previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.
80JS031
NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, “CENTER” is
marked on the buckle and latch plate of the
center lap belt. The buckles are designed
so a latch plate cannot be inserted into the
wrong buckle.
NOTE:
For Australia:
For additional information, refer to the
“SUPPLEMENT” section at the end of this
book.
TO TIGHTEN
Low on hips
TO LOOSEN
Right angle