Suzuki CELERIO Series Owner'S Manual Download Page 201

Page: 201 / 386

5-51

OTHER CONTROLS AND EQUIPMENT

84MM6-01E

Notes on USB device

Compatible USB devices

• USB Mass Storage Class

For details as to whether your USB

memory/USB Audio is compatible with

USB Mass Storage Class, please con-

tact the USB memory/USB Audio manu-

facturer.

• USB Standard Compatibility 1.1/2.0 Full

Speed

• File System FAT12/16/32, VFAT

• Maximum current less than 1.0 A

• If devices such as USB hub, extension

cable are connected to the audio sys-

tem, it may not be recognized. In such

case connect the USB device directly to

the audio system.

• Devices such as MP3 player/Mobile

phone/digital camera may not be recog-

nized by the audio system for playing

music.

USB device connection

• When connecting a USB device, make

sure that the connector is pushed all the

way into the port.

• Do not leave the USB device for long

periods of time in places inside the vehi-

cle where the temperature can rise too

high.

• Back up any important data beforehand.

We cannot accept responsibility for any

lost data.

• It is recommended not to connect a USB

device that contains data files other than

MP3/WMA/AAC format.

Recording MP3/WMA/AAC files on a

USB device

• Playback or display may not be possible

depending on the type of USB device in

use or the condition of the recording.

• Depending on the connected USB mem-

ory, the files may be played in different

order from the order that the files were

stored.

Compression formats

MP3

• Bit rate:

MPEG1 Audio Layer III: 32 k - 320 kbps

MPEG2 Audio Layer III: 8 k - 160 kbps

MPEG2.5 Audio Layer III: 8 k - 160 kbps

• Sampling frequency:

MPEG1 Audio Layer III: 32 k/44.1 k/48 kHz

MPEG2 Audio Layer III: 16 k/22.05 k/24 kHz

MPEG2.5 Audio Layer III: 8 k/11.025 k/12 kHz

WMA (Ver. 7, Ver. 8, Ver. 9*)

• Bit rate: CBR 32 k - 320 kbps

• Sampling frequency: 32 k/44.1 k/48 kHz

* WMA 9 Professional/LossLess/Voice are

not supported.

AAC*

• Bit rate: ABR 16 k - 320 kbps

• Sampling frequency: 32 k/44.1 k/48 kHz

* Apple Lossless is not supported.

Maximum number of files/folders

• Maximum number of files: 2500

• Maximum number of files in a folder: 255

• Maximum depth of tree structure: 8

• Maximum number of folders: 255

(Root folder is included.)

Summary of Contents for CELERIO Series



































































































































































































































































































































































































Search results

Summary of Contents for CELERIO Series

Reviews:

Related manuals for CELERIO Series

Brands by name

Popular brands

Suzuki CELERIO Series, Owner'S Manual

Search results

Summary of Contents for CELERIO Series

Reviews:

Related manuals for CELERIO Series

Brands by name

Popular brands