Suzuki Baleno, Manual

Page: 97 / 468

2-78
BEFORE DRIVING
68PM2-01E
Oil indicator
If either of odometer reading or time is
reached to the value which is set by the oil
life monitoring system, the oil change
request light comes on when the ignition
switch is in “ON” position. The “Oil” indica-
tion is shown on the Information Display
(C) to tell you it is necessary to change the
engine oil and oil filter.
68PM00274
For instructions on how to change the
engine oil and filter, refer to “Changing
engine oil and filter” in “INSPECTION AND
MAINTENANCE” section or consult your
SUZUKI dealer for advice on appropriate
procedure of engine oil and oil filter main-
tenance.
To monitor the next oil and oil filter change
timing properly, it is necessary to reset the
odometer reading and the time for the
light. The light will go out after the reset.
For the resetting procedure, it is recom-
mended to consult your SUZUKI dealer. If
you reset it by yourself, follow the proce-
dure described below:
To reset the engine oil life monitoring sys-
tem:
1) Turn the ignition key to “ON” position.
2) Push and hold the indicator selector
knob (3) for a while when the display
shows the oil change request light and
oil indicator.
68PM00275
3) Push and hold the indicator selector
knob (3), display will change as follows.
When the oil life monitoring system is
reset, the oil change request light and
oil indicator will go out and then the dis-
play indicates odometer.
68PM20205
EXAMPLE
(3)
EXAMPLE
EXAMPLE