Suzuki Baleno, Manual

Page: 214 / 468

3-55
OPERATING YOUR VEHICLE
68PM2-01E
Changing speed setting
Setting to the current speed
1) Push “CANCEL” switch (2).
2) Accelerate or decelerate to the desired
speed.
3) Push “SET –” switch (4), “SET” indica-
tor (6) come on or appear on the infor-
mation display. The current vehicle
speed is set as the maximum speed.
Using “RES +” switch or “SET –” switch
To change to a faster speed, press repeat-
edly or hold push “RES +” switch (3).
To change to a slower speed, press
repeatedly or hold push “SET –” switch
(4).
NOTE:
• You can adjust the set speed by 1 km/h
(or 1 mph) by pushing “RES +” switch (3)
or “SET – ” switch (4) quickly.
• You can adjust the set speed by 5 km/h
(or 5 mph) by pushing and holding “RES
+” switch (3) or “SET –” switch (4).
• If the current vehicle speed exceeds the
maximum speed when changing to the
slower speed using “RES +” switch (3) or
“SET –” switch (4), the speed indication
(7) will flash and the buzzer will sound.
Cancelling speed limiter
• To cancel the speed limiter, push “CAN-
CEL” switch (2). The set indicator (6) will
disappear.
• To resume the previously set speed,
push “RES +” switch (3) and show “SET”
indicator (6).
To turn off the speed limiter system, push
“LIMIT” switch (1) and check that limit indi-
cator (5) disappears.
Also, you can turn off the speed limiter by
turning off the engine.
NOTE:
If you turn off the speed limiter system, the
previously set speed in the memory is
cleared. Set your speed again.
Radar brake support system
(if equipped)
Radar brake support system measures the
relative velocity of, and distance from, the
vehicle in front of you by radar and then
attempts to avoid a crash by giving warn-
ing and, in the event of a crash, attempts to
reduce damage through brake control.
WARNING
• Radar brake support system has
limits and may not function prop-
erly depending on the driving con-
ditions. Do not rely excessively on
the system and always drive in a
safe manner.
• For safety reasons, do not check
the operation of the system by
yourself.
• Check that all passengers fasten
their seat belts when the vehicle is
being operated.
When the system is activated, there
is a risk of serious injury from
being thrown.
(Continued)