Suzuki Baleno, Manual

Page: 93 / 468

2-74
BEFORE DRIVING
68PM2-01E
Thermometer
When the ignition switch is in “ON” posi-
tion, the display (A) shows the thermome-
ter.
The thermometer indicates the outside
temperature.
68PH02214
If the outside temperature nears freezing,
the mark (a) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to “ON” position, the display
may not indicate the outside tempera-
ture.
When the display (C) shows the driving
range, you can change the unit of tem-
perature.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (2), turn the indicator selector knob
(3).
68PM00273
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Selector position (for automatic
transaxle or CVT vehicles) / Gear-
shift indicator (if equipped)
68PH02215
Selector position
When the ignition switch is in “ON” posi-
tion, the display (B) indicates the gear
position (b).
For details on how to use the transaxle,
refer to “Using transaxle” in “OPERATING
YOUR VEHICLE” section.
Gearshift indicator
Refer to “Gearshift indicator” in “OPERAT-
ING YOUR VEHICLE” section.
(a)
EXAMPLE
EXAMPLE
(Initial
setting)
(b)
EXAMPLE