Suzuki Baleno, Manual

Page: 235 / 468

3-76
OPERATING YOUR VEHICLE
68PM2-01E
NOTE:
• Thin poles or obstacles lower than the
sensors may become undetectable as
the vehicle moves closer to them even if
they have been detected from longer
distances.
• The system may calculate the distance
to a road sign or similar obstacle to be
shorter than the actual distance.
How to use the parking sensor
Parking sensor switch
61MM0A102
(1) Parking sensor switch
(2) Indicator
(2)
(1)
• Press the engine switch to change the ignition mode to “ON” with the parking sensor
switch in the “ON” position.
• Push the switch again and it stays in; this is the OFF position. The indicator in the
switch goes out and the parking sensor is deactivated.
NOTE:
• If you push the parking sensor switch from the “OFF” to “ON” position when the engine
switch is pressed to change the ignition mode to “ON”, the inside buzzer sounds.
• When the gearshift lever is shifted to the “R” (Reverse) position with the system ON, a
buzzer will sound once.
Switch position State
EXAMPLE
ON
• When the indicator light is on and all necessary conditions are
met, system becomes ready for operation.
EXAMPLE
OFF
• The system does not operate. Push the switch to turn off the
indicator if you do not wish to use the parking sensor.