Suzuki Baleno, Manual

Page: 116 / 468

2-97
BEFORE DRIVING
68PM2-01E
Display item
(Car color setting)
You can change the car color of the infor-
mation display.
(Calendar dis setting)
You can change the on/off of the calendar.
(Calendar form setting)
You can change the calendar form of the
information display.
(Fuel eco hist setting)
Transitional indication of average fuel con-
sumption can be switched to timed indica-
tion and driving cycle indication.
(Motion hist setting)
Indication of G position history graph at the
vehicle stopped can be selected to enable
or disable.
(Idling dsp setting)
Display of ENG A-STOP operation with
ignition mode “LOCK” (OFF) is selectable
to indicate or not to indicate.
(Pedal op dsp setting)
Display of “Accelerator and brake” is
selectable to indicate or not to indicate.
Default (initialization setting)
If you select “YES” and push the indicator
selector knob (2), all settings will be reini-
tialized.
Warning and Indicator Messages
The display shows warning and indicator
messages to let you know about certain
vehicle problems.
A tone may also sound to alert you.
If warning and indicator messages appear
on the display, follow the messages.
Master warning indicator light
68PM00278
When the display shows warning and indi-
cator messages, the master warning indi-
cator light may also blink.
NOTE:
• When the problem that causes a mes-
sage to appear is corrected, the mes-
sage will disappear.
• If a message is displayed, and other
problems requiring a message occur, the
message for each of the problems will
be alternately displayed about every 5
seconds.
• When you push and hold the indicator
selector knob (2) for about 2 seconds
while a message is displayed, the mes-
sage will disappear temporarily. If the
problem that caused the message is not
corrected, the message will appear
again after 5 seconds.