background image

General Information

SDS-35

1

5004522-000 Rev. 03



SUZOHAPP

1

General Information

SUZOHAPP reserves the right to revise and improve its products as 

it sees fit. This document describes the product at the time of 

publication and may not reflect the product in the future.

This publication, or parts thereof, may not be reproduced in any 

form whatsoever other than for the purchaser’s own use without the 

express permission of SUZOHAPP.

1.1 Declaration of Conformity

We declare under our sole responsibility that the product, stated in 

this manual, to which this declaration relates, is in conformity with 

the following standards or other normative documents:

– IEC 62368-1:2014
– UL 62368-1:2014
– CSA C22.2#62368-1:2014
– EN 61 000-6-1:2007
– EN 61 000-6-3:2007
– EN 61 000-6-3:2007/A:1:2011
– 47 CFR, Part 15:2017
– ICES-003, Issue 6:2016
– EN 50581:2012
– AS/NZS CISPR 22:2009 + A1:2010

following the provisions of:

– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU.

1.2 Environmental Compliance

Note!

If the equipment contains batteries or accumulators, dispose of these 

separately according to local requirements.

WEEE Directive

Waste Electrical and Electronic Equipment Directive 2012/19/EU.

Note!

If the equipment contains batteries or accumulators, dispose of those 

items separately according to local requirements.

RoHS 2

RoHS2 Restriction of Hazardous Substances Directive 2011/65/EU.

Contact your SUZOHAPP representative for further details.

Summary of Contents for CashComplete SDS-35

















































Reviews: