Manual Round video topper
version 1.7
Page 9
9. Removing the transparent dome.
First remove the two flat head screws on the rear of the video round topper. When the screws are
removed Push the screw ends inside the hole to move the dome ring forward. It is now easy to pull the
dome from the topper.
10. Adjusting the base
The base can be adjusted in 5 discrete positions. The video round topper can be mounted in a vertical
position and under a 5 deg angle. Further angles are provided to achieve the same result with sloped
cabinets. If a cabinet is sloped backwards 10deg you can still create a 5 deg overhang by using the 15
deg base setting.
The base can only be adjusted when the topper is not
placed on the machine. There are two sliding metal
plates which keep the base in place. If you want to
adjust the base you have to unscrew the nut that keep
both plates in place. You can now lift the base. When
the base is lifted from the screws it becomes possible to
move the metal plates. The metal plates have 5 holes.
Each hole results in a different base angle. The angles
are noted next to het holes. You can see which angles
are possible form the picture above.
