Manual Round video topper
version 1.7
Page 4
7.2. Monitor
Power on:
Switch on the monitor by using the on/off switch on the OSD control buttons.
PC Setting:
The controller has been designed to take a very wide range of input signals however to
optimize the PC’s graphic performance we recommend choosing 60Hz vertical refresh rate this will not
cause screen flicker.
OSD Control Board:
On the rear of the round video topper is the OSD control boeard (On Screen
Display) provides certain functions to have clear image and others. This board supports 4 buttons
OSD operation as a standard. The control functions defined on OSD operation are as below
The chosen OSD settings will be stored in memory. The OSD menu can be cleared from the screen
from the screen by moving the selection bar to the EXIT MENU icon pressing the SEL button
otherwise it will be automatically cleared after a few second ofnon-use.
