Suunto TRAVERSE 1.0 User Manual Download Page 78 | Manualshive

Page: 78 / 86

background image

been tested to comply with FCC standards and is intended for home
or office use.
Changes or modifications not expressly approved by Suunto could
void your authority to operate this device under FCC regulations.

5.2.3 IC

This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.

5.2.4 NOM-121-SCT1-2009

The operation of this equipment is subject to the following two
conditions: (1) it is possible that this equipment or device may not
cause harmful interference, and (2) this equipment or device must
accept any interference, including interference that may cause
undesired operation of the equipment or device.

5.3 Trademark

Suunto Traverse, its logos, and other Suunto brand trademarks and
made names are registered or unregistered trademarks of Suunto
Oy. All rights are reserved.

5.4 Patent notice

This product is protected by pending patent applications and their
corresponding national rights: US 7,271,774 , US 7,324,002, US

78

«
...
76
77
78
79
80
...
»

Summary of Contents for TRAVERSE 1.0























































































Reviews:

No comments

Related manuals for TRAVERSE 1.0

Brand: Raymond Weil Pages: 141

Brand: Caldwell Pages: 8

Brand: hager Pages: 4

Brand: S.Epson Pages: 5

Brand: Wesseldon Pages: 5

Brand: Citizen Pages: 2

Brand: Japan CBM Corporation Pages: 2

Brand: Chr. Ward Pages: 18

Brand: Bruno Sohnle Pages: 105

Brand: GEONAUTE Pages: 11

Brand: Hamilton Pages: 150

Brand: Casio Pages: 15

Brand: TAG Heuer Pages: 5

Brand: SII Pages: 35

Brand: Garmin Pages: 16

Brand: Garmin Pages: 30

Brand: Timberland Pages: 19

Brand: Timberland Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands