manualshive.com logo in svg

Suunto TRAVERSE 1.0, User Manual, Page: 22 / 86

Share
Download
Suunto TRAVERSE 1.0 User Manual Download Page 22

3.3  Autopause

Autopause pauses the recording of your activity when your speed is
less than 2 km/h (1.2 mph). When your speed increases to more than
3 km/h (1.9 mph), the recording continues automatically.
You can turn autopause on/off for each sport mode in Movescount
under the advanced settings for the sport mode.

3.4  Backlight

Pressing [LIGHT] activates the backlight.
By default, the backlight turns on for a few seconds and turns off
automatically.
There are four backlight modes:

•

Normal

: The backlight turns on for a few seconds when you

press [LIGHT] and when the alarm clock sounds. This is the
default setting.

•

Off

: The backlight is not switched on by pressing a button or

when the alarm clock sounds.

•

Night

: The backlight turns on for a few seconds when you press

any button and when the alarm clock sounds.

•

Toggle

: The backlight turns on when you press [LIGHT] and stays

on until you press [LIGHT] again.

You can change the general backlight setting in the watch settings
under 

GENERAL

 » 

Tones/display

 » 

Backlight

. You can also change

the general setting in Movescount.

22

Summary of Contents for TRAVERSE 1.0























































































Reviews:

No comments