TIP:
When in breadcrumb or compass display, you can quickly
access the navigation menu by pressing [START].
3.18.7 Setting altitude during a recording
You can adjust any of your alti-baro settings, including profile and
reference, during a recording. Keep [NEXT] pressed and adjust
settings as normal (see
3.2 Alti-Baro
).
3.19 Points of interest
Suunto Traverse includes GPS navigation which allows you to
navigate to a pre-defined destination stored as a point of interest
(POI).
NOTE:
You can also start navigating to a POI when you are
recording an activity (see 3.18.6 Navigating during a recording).
To navigate to a POI:
1. Press [START] to enter the start menu.
2. Scroll to
NAVIGATION
with [START] and press [NEXT].
3. Scroll to
POIs (Points of interest)
using [LIGHT] and press [NEXT].
4. Scroll to the POI you wish to navigate to with [START] or [LIGHT]
and select with [NEXT].
5. Press [NEXT] again to select
Navigate
.
If you are using the compass for the first time, you need to
calibrate it (see
3.6.1 Calibrating compass
). After activating the
compass, the watch starts searching for a GPS signal.
53
Summary of Contents for TRAVERSE 1.0
Page 1: ...SUUNTO TRAVERSE 1 0 USER GUIDE ...
Page 82: ...82 ...
