30
TRIO MP-235 THREE-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.23 (20190130) (FW V2.2 & 2.3)
APPENDIX C.
TECHNICAL SPECIFICATIONS
Travel
25mm on X & Y; 50mm on D
Resolution Minimal
microstep
size is 62.5 nanometers per
microstep. Display has single micron resolution.
Speed 5
mm/sec.
maximum
Drift
< 1 micron/hr drive mechanism
Electrical:
Power Adapter:
Meanwell GS60A24-P1J
Input (Mains )
100 - 240 VAC, 50/60 Hz, 1.4A
Output (to controller)
24V DC, 2.5A, 60W Max. (see following table for cable specs)
System Power consumption 60-Watts
maximum
Mains fuses
None replaceable (power protection built into the Power
Adapter)
Cables
(Refer to the following tables for a description of all possible
cables.)
Table 6-1. TRIO MP-235 cables and receptacles/connectors.
Controller Rear Panel
Port
Connector/Receptacle
Cable Connector
Types
Connects to ...
Cable Type
Cable
Max.
Length
Power Adapter
3-pin male connector
◄─
3-pin power
standard (female)
│
3-pin male
─►
(Geographical region
dependent)
Mains power source.
10A, 250V, with
safety ground
plug
3 meters
(approx.
10 feet)
ROE/Controller Cabinet:
MANIPULATOR
(26-Pin HD DSUB female
receptacle)
◄─HD
DB-26 male
│
HD DB-26 female
─►
(Straight-through)
TRIO MP-235/M
Minimum of 26
awg stranded
wire with 500
Volt.
3 meters
(approx.
10 feet)
Power Adapter
◄─
(fixed)
│
ID 2.1 x OD 5.5 mm
Barrel Plug (male)
─►
ROE/Controller
Cabinet:
POWER receptacle
(center pin positive)
UL1185 18AWG
1.8 meters
(approx. 6
feet)
ROE/Controller Cabinet:
GROUND
(1-pin Banana-style
female receptacle)
◄─
Banana male
│
─►
Alligator clip
(hooded)
a ground/earth source
(user determined)
