Installation
SUSPA Movotec SMS - Installation Instructions
Page 33
6.4
Space Requirements
For detailed information on space requirements refer to the Section 4.1
“Technical specifications”.
6.5
Component Alignment
A level will be required to ensure the entire work surface is horizontal and level.
Create a good starting point for leveling, by completely threading the leveling feet in the lift-
ing elements. The screw insertion depth is up to 32 mm. In the leveled state, the screw inser-
tion depth should be at least 18mm.
Place a level on the surface of the work station.
Ensure a very uniform load distribution when using several lifting elements.
Figure 19 Adjusting the workstation with level
