Installation
SUSPA Movotec SMS - Installation Instructions
Page 32
6.3.6
Laying of Electric Wires and Cables
When laying the cables, make sure that
▪
they cannot get jammed
▪
they are not subjected to mechanical loads or stresses (tension, pressure or bending etc.)
▪
they cannot be damaged in any other way
Fasten the cables with adequate strain relief and adequate protection against kinks.
Wind the excess length of cables together in rolls with a diameter of approx. 150 mm and fas-
ten them with the fastening clamps and/or cable ties to the workplace.
Use caution so as not to damage the wires.
Check the electrical lines and cables to ensure that they are fastened securely to the work-
place and have not been damaged during the operation.
Figure 18 Coiling of electric wires and cables
