Installation
SUSPA Movotec SMS - Installation Instructions
Page 23
6.3.2
Installing the Lifting Elements
Remove the protective packaging in which the lifting elements and the drilling templates are
packaged.
Figure 5 Unpacking
Clean all surfaces of the legs of the workplace thoroughly in order to ensure that the drill
templates for the lifting elements adhere to them.
Align the workplace as described in the following in order to facilitate the positioning and in-
stallation of the components.
Figure 6 Aligning the workplace
Fasten the drill templates parallel to the surfaces of the legs of the workplace.
Make sure that the drilling template is aligned correctly.
IMPORTANT
Make sure that the drill templates are illustrated in the inverted position based
on the positioning of the workplace.
