SurfRAID LC16 Series User’s
Manual
32
3.4.2 Sample 2. Change the password of your RAID
You may change some of the parameters after the RAID has successfully installed the data. To
avoid data loss, please do not make any change to
“Re-Conf RAID”
,
“RAID Level”
,
“Disk
Number”
,
“Slice”, “Stripe Size”, “Erase NVRAM”
, “
Init
RAID
5”
&
“R5
Check”,
all of
them will cause data on the drives to be permanently erased.
The following is the procedure for changing the password
1 RAID Params
12 RAID Level
1 RAID Params
13 Disk Number
13 Disk Number
Moving the cursor to “n”.
12
“n”= the numbers of disk in
13 Disk Number
“n”
1 RAID Number
13 Disk Number
Main Menu
0 Quick Setup
Main Menu
2 Interf Params
2 Interf Params
21 Primary SCSI
21 Primary SCSI
211 Set SCSI ID
211 Set SCSI ID
Moving the cursor to “n” .
0
“n” = The SCSI ID what you want
211 Set SCSI ID
“n”
2 Interf Params
21 Set SCSI ID
Main Menu
0 Quick Setup
Main Menu
5 NVRAM
5 NVRAM
51 Update NVRAM
51 Update NVRAM
No
51 Update NVRAM
Yes
ENT
Enter
Confirm to write configuration
data into NVRAM.
ENT
Enter
To select “51 Update NVRAM” to
update the configuration data.
Z
Moving the cursor to “Yes”.
Z
Moving the cursor to “ NVRAM”
Menu
ENT
Enter
Enter to “NVRAM” Menu.
To confirm the SCSI ID number.
ESC
ESC
Exit to Main Menu
Z
ENT
Enter
ENT
Enter
Select “ 21 Primary SCSI ” to
configure the Primary SCSI
ENT
Enter
Select “ 211 Set SCSI ID “ to set
SCSI number of Primary SCSI
Z
Moving the cursor to “ 2 Interf
Params”
ENT
Enter
Enter to “ 2 Interf Params” Menu
To confirm the numbers of disk in
RAID.
ESC
ESC
Exit to Main Menu
Z
ENT
Enter
Z
Moving the cursor to “13 Disk
Number”
ENT
Enter
Select “13 Disk Number” to setup
Disk Number in the RAID .
