SurfRAID LC16 Series, User Manual

Page: 23 / 47

SurfRAID LC16 Series User’s
Manual 23
3.3.2.1 RAID Params MENU
RAID Params menu configures the SurfRAID LC16 for the different supported RAID levels. To avoid
accidentally erasing an existing configuration you must specify, using the “Re-Conf RAID” option, if you
want to change the configuration.
NOTE: Any changes made to Re-Conf RAID , RAID Level , Disk Number , Slice & Stripe Size
will cause data on the drives to be permanently erased.
Main Menu
0 QUICK SETUP
1 RAID Params
2 Host Interface Params
3 RS232 Params
4 System Params
5 NVRAM
6 RAID Funcs
Sub-menu option Sub-Option Settings Default setting
2 1. Re-Conf RAID Yes, No No.
Description Using to change an existing RAID configuration. Only
use to change the RAID level and Disk Number
Sub-Option Settings Default setting
2 2. RAID Level 0,1,3,5,0+1, None 5.
Description Use to specify the RAID Level. Refer to section for a
description of each RAID level
Sub-Option Settings Default setting
2 3. Disk Number 16,14,12,10,8, 6, 4, 2, 2
Description : Use to specify the number of disks in the array. The
number is based on the number of physical disks
installed
Sub-menu Sub-Options Setting Default
2 4. Slice 41 Slice0 MB Same as RAID Capacity
21 Array 1
22 Array 2
23 Array 3
24 Array 4
42 Slice1 MB 0
43 Slice2 MB 0
44 Slice3 MB 0
45 Slice4 MB 0
46 Slice5 MB 0
47 Slice6 MB 0
48 Slice7 MB 0
21 Array 1
22 Array 2
23 Array 3
24 Array 4
Description : Use to divide the RAID capacity to several separated
Slices. Maximum 8 of Slices can be set at same time.
Description :
SurfRAID LC16
supports Multiple RAID function, 4 of individual Arrays can
be configured.