6
7
Connecting SurfLink Media and Media Source
Optical/TOSLINK Installation
1. Connect the optical/TOSLINK cable into the optical/TOSLINK
“AUDIO OUT” port (labeled 3) on the media source.
2. Select the signal type as Monaural or Binaural audio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
3. Connect the opposite end of the optical/
TOSLINK cable into the optical/TOSLINK
port on the back of SurfLink Media.
4. Place SurfLink Media in a desired
location that is in close proximity to
the media source.
Once SurfLink Media has been turned on
it will begin to stream the audio signal.
Connecting SurfLink Media and Media Source
External Microphone Installation
In the instance your television does not support the cable installation options listed
on the previous pages, an external microphone can be used.
1. Connect the microphone cable into the microphone
port (labeled 1) on the back of SurfLink Media.
2. Select the signal type as Monaural or Binaural audio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
3. Place the microphone as close as
possible to the speaker(s) of the
desired media source.
Once SurfLink Media has been turned on
on
it will begin to stream the audio signal.
Television with External
Microphone Confi guration
Power
Streaming Activation
Control
Volume Control
Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
Power
Streaming Activation
Control
Volume Control
Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
