4
5
Connecting SurfLink Media and Media Source
RCA Cable Installation (most common connection option)
1. Connect the red and white RCA cable plugs into the corresponding
red and white RCA jacks (labeled 2) on SurfLink Media.
2. Select the signal type as Monaural or Binaural audio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
3. Connect the opposite end of the red and
white RCA cable jacks into the corresponding
red and white RCA “AUDIO OUT” jacks on
the media source.
4. Place SurfLink Media in a desired location
that is in close proximity to the media source.
Once SurfLink Media has been turned on it will begin to stream the audio signal.
Connecting SurfLink Media and Media Source
S/PDIF Installation
1. Connect the orange S/PDIF cable into the orange S/PDIF “AUDIO OUT” port (labeled 4)
on the media source.
2. Select the signal type as Monaural or Binaural audio
stream based on your hearing system confi guration.
Monaural if you are wearing one hearing instrument.
Binaural if you are wearing two hearing instruments.
3. Connect the opposite end of the orange
S/PDIF cable into the orange S/PDIF port
on the back of SurfLink Media.
4. Place SurfLink Media in a desired location
that is in close proximity to the media
source.
Once SurfLink Media has been turned on it will begin to stream the audio signal.
Power
Streaming Activation
Control
Volume Control
Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
Power
Streaming Activation
Control
Volume Control
Microphone RCA Jacks Optical S/PDIF Monaural/Binaural Power
TOSLINK Selection
Optical S/PDIF Monaural/Binaural Power
SLINK Selection
