background image

16

Surface Concept GmbH

Am Sägewerk 23a

55124 Mainz

Germany

phone:  

+49 6131 62716 0

fax: 

 

+49 6131 62716 29

email:  

[email protected]

web:    

www.surface-concept.de

Manufacturer

Product

Model

High Voltage Power Supply

19” HVPS-HC Module

The above named products comply with the following European directive:

89/336/EEC

   

 

 

Electromagnetic Compability Directive, amended by 91/263/ EEC  

     and 

92/31/ 

EEC 

and 

93/68/EEC

73/23/EEC

 

 

 

 

Low Voltage Equipment Directive, amended by 93/68/EEC

The compliance of the above named product to which this declaration relates is in conformity with the 

following standards or other normative documents where relevant:

EN 61000-6-2:2005+AC:2005

  

Electromagnetic compatibility (EMC):

 

 

 

 

 

Generic standards - Immunity for industrial environments

EN 61000-6-4:2007+A1:2011

  

Electromagnetic compatibility (EMC):

 

 

 

 

 

Generic standards - Emission standard for industrial environments

EN 61010-1: 2010

 

 

 

Safety Requirements for Electrical Equipment for Measurement,      

     Control 

and 

Laboratory 

Use

This declaration does not represent a commitment to features or capabilities of the instrument. The safety notes and regulations 

given in the product related documentation must be observed at all times.

For and on behalf of 

Surface Concept GmbH

Mainz,……01.10.2019……….

Legal Signature…………………………………………

(Date)

(Dr. Andreas Oelsner)

email:

EC Declaration of Conformity

19“ HVPS-HC Module R012 Manual | Surface Concept GmbH

Summary of Contents for HVPS-HC

















Reviews: